Blog · Packaging and inspection

ISPM 15 and Your Pallets: What Canada Actually Requires

By RRA Group Inc. · Published 8 November 2026

Most importers never think about the pallet until the pallet is the problem. Wood packaging has its own rules, enforced separately from everything else on your entry, and when it fails the answer is not a fine. It is that the shipment leaves Canada.

ISPM 15 Explained: Check Your Pallets Before Importing

What Counts as Wood Packaging

CFIA defines wood packaging material as wood or wood products, excluding paper products, used in supporting, protecting or carrying a commodity. That includes pallets, load boards, dunnage, crating, boxes, spacers, bearers and bracing.

Ship’s dunnage counts too. Vessels may only discharge dunnage into Canada if it complies.

The Big One: Goods From the United States Are Exempt. For Now.

CFIA is explicit: wood packaging material imported from the continental United States is currently exempt from the requirements in policy D-98-08.

But read the next sentence carefully, because two things trip people up.

First, this is temporary. CFIA and USDA-APHIS are developing a strategy with a phase-in period toward full ISPM 15 implementation between the two countries, and CFIA says D-98-08 will be updated to reflect it. If your supply chain depends on this exemption, it is worth knowing it has an end date that has not been announced yet.

Second, transiting the United States does not help you. CFIA’s wording: "regardless of whether the commodity transits through the United States, all wood packaging material must meet Canada’s import requirements."

So goods from Asia or Europe that cross the United States on their way to Canada are not covered by the US exemption. The origin of the wood packaging is what matters, not the route. This is the single most common misunderstanding we see.

What Compliant Wood Packaging Looks Like

For wood packaging from anywhere other than Canada or the continental United States:

  • Treated by heat treatment, dielectric heating or fumigation with methyl bromide
  • Debarked. If fumigated, debarking must happen before treatment. For heat treatment it can be before or after
  • Treated and marked under the authority of the national plant protection organisation of the country that produced the packaging
  • Marked with an ISPM 15 mark

On methyl bromide: it is an accepted treatment internationally, but CFIA does not promote its use in Canada, under Canada’s ratification of the Montreal Protocol.

What Is Exempt

Wood packaging made wholly, 100 per cent, of processed wood is exempt. Processed wood includes plywood, particle board, oriented strand board, fibreboard and veneer.

Also exempt:

  • Wood packaging made entirely from thin wood, 6 millimetres or less in thickness
  • Specific wine and spirit barrels heated during manufacture
  • Gift boxes for wine, cigars and other goods, made from wood processed so as to be free of pests
  • Wood shavings, sawdust and wood wool used to stabilise a commodity
  • Wood components permanently attached to freight vehicles and containers, such as flat racks

One catch worth knowing. Packaging made of a combination of processed and unprocessed wood is still regulated. The exemption is for wholly processed wood, not mostly.

What Happens When It Fails, and It Is Worse Than People Expect

CFIA’s wording: "Any shipments with non-compliant wood packaging material will be ordered removed from Canada."

It may also be required to be treated. But treating it does not fix the problem: CFIA states that treatment does not make the shipment eligible for entry to Canada.

The costs of inspection, treatment and disposal all fall on the importer, along with inspection fees set out in the CFIA Fees Notice.

Read that again if you have been assuming a bad pallet means a delay and a fee. It can mean your goods go back.

Inspections are carried out by CBSA or CFIA, and they may hold the container sealed until they can look at it.

If You Are Exporting From Canada

Wood packaging going to a country that has adopted ISPM 15, other than the continental United States, must be:

  • Produced by or purchased from a facility approved as complying with ISPM 15
  • Heat treated to a minimum core temperature of 56°C for at least 30 minutes in a CFIA-approved heat treatment facility
  • Debarked to CFIA’s specification
  • Marked with an IPPC mark

Canada to the United States is different again. Currently the wood must be free of living pests and signs of them, and where it carries no ISPM 15 mark it must have been produced in Canada or the US, with shipping documents saying so.

What to Do Before the Goods Ship

Ask your supplier for a photograph of the stamp on the actual pallets before the container is loaded. Not a certificate, not an assurance. The stamp.

It is the cheapest check in the whole shipment and it is the one almost nobody makes.

Not Sure Your Supplier's Packaging Will Pass?

Tell us where the goods ship from and what they are packed on. We will tell you what to ask for before the container is loaded.

Request a Freight Quote